User's Manual

Mars1417V Digital Flat Panel Detector User Manual
14
................................................................................................................................................iRay
Technology Co. Ltd.
Power supply  Always connect three-core power cord plug to a
grounded AC power outlet.
 To make it easy to disconnect the plug a t any time,
avoid putting any obstacles near the outlet. Otherwise,
it may not be possible to disconnect the plug in an
emergency.
 Be sure to ground the product to an indoor grounded
connector. Also, be su re to connec t all the grounds of
system to common ground.
 Do not use any power source other than the one
provided with the product.
Otherwise, fire or electric shock may be caused due to
leakage.
Handling  Do not spill liquid or chemicals onto the equipment. In
case the patient is injured, it is not allowed to contact
with blood or other body fluids.
Doing so may result in fire or electric shock.
In such a situation, protect the equipment with a disposable
cover as necessary.
 Turn OFF the power and pull out the p lug to each
piece of equipment for safety when not used.
CAUTION
Handling  Handle the product carefully.
 Do not submerge the product in water.
 Only working surface meets IPX1
 The internal image sensor may be damaged if
something hits against it or it is dropped. If the product
is dropped, the drop sensor inside would record and
the product would not be warranted by iRay.
 Do not place excessive weight on the panel.
Otherwise, the internal image sensor may be damaged and
image may be incorrect.
Patients stand on the product temporarily, and the intended
weight can be 135kg.
Based on the internal TFT character, cannot load the
dynamic forces due to loading from persons
<Load Limit>