User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
Mars1717V Digital Flat Panel Detector User Manual
78 iRay Technology Co. Ltd..
5.1.4.3 Timing Setting
1. X-ray generator is ready for X-ray shooting and begins to release X-ray.
2. Workstation receives “Exposure Prohibited” from Panel.
3. If hardware offset is selected, panel would do offset first, and then upload
preview image.
4. If hardware offset is chosen, panel would do correction and calibration first,
then upload processed image to Workstation.
5. Workstation receives “Exposure Enable” from Panel.
5.1.5 After Use
1. Disconnect the software
2. Power off
3. Keep it clean
4. Store under specified conditions