User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
4. Software Setup
iRay Technology Co. Ltd. 61
Choose SSID and
select(There will be √
occurred)
Click “write config” to
save parameters.
Turn on wireless router.
Make sure there are
wired connection
between router and work
station and IP
192.168.8.188.
Click “Read wifi Status”
to check wireless
transmission status,
numerical value occurred
means the link is up and
available.
Since we have chosen default SSID and password, it would connect to wireless AP
immediately after powered on next time.