User's Manual

3. Installation
iRay Technology Co. Ltd. 39
3.1.5 Button function table
The Button function is shown as table below
Action
FPD
Status
Power
Mode
Note
N.A.
/
No-Action
No-Action
Power ON
Power
OFF
Short-Hold
No-Action
Hold for 4 seconds.
Forced Restart
Long-Hold
No-Action
Hold for more than 7 seconds,
Release Power Key when the POWER
indicator is ON.
Forced Restart
Power
ON
Long-Hold
No-Action
Hold for more than 7 seconds, when the
POWER indicator is OFF and then ON,
Release Power Key.
Enter/Exit Sleep
Mode
Double-Click
No-Action
Release after two short presses (interval
<1s)
Power OFF
Short-Hold
No-Action
Hold for 4 seconds, Release Power Key
when the POWER indicator is OFF.
Wireless
Connection
Mode Switch
No-Action
Long-Hold
and then
Short click

Hold MODE key for more than 7
seconds.

Release Mode KEY after Mode
indicator blinking, and then Press
again in 5 seconds. The Mode
starts switching.
 Click Mode Key to switch mode,
Mode indicator blinks at
corresponding Colour
 Wait at intended Mode, the Mode
will switch after Several secods.

Mode indicator Blue : Client

Mode indicator Green : AP