User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
Mars1717V Digital Flat Panel Detector User Manual
36 iRay Technology Co. Ltd..
3.1.2 Attach DC Power
Please see below for DC power installation.
Connect one end of DC Power Cable to the
Medical Adapter
As figure is power interface Ethernet
interface
Connect another end of DC Power Cable to
the DC input of the detector.
3.1.3 Booting Up
On the control panel, user can press power button to power on/off.
If panel is powered off, user can press the
button for 4 seconds to power on when
battery is inserted and battery capacity is no
less than 10%, or DC power is connected.
If panel is powered on, user can press the
button for 4 seconds to shut down. On the
other hand, it can also be used as reset inner
control IC when button is active for 8s.
3.1.4 Indicator