User's Manual
Table Of Contents
- To Customers
- Contents
- 1.Safety
- 2. General Description
- 3. Installation
- 4.Software Setup
- 5. Operation
- 6. Regulatory Information
- 7. Trouble Shooting
- 8. Service Information
- Appendix
- FCC Regulations:
1. Safety
iRay Technology Co. Ltd. 13
Be sure to use the equipment on a protected foam.
Otherwise, the internal image sensor may be damaged.
Be sure to securely hold the detector while using it in
upright positions. Otherwise, the detector may fall
over, resulting in injury to the user or patient, or may
flip over, resulting in damage to the inner device.
Keep the same load (same pressure) on the detector when
acquiring the image. Otherwise, the image will be incorrect.
CAUTION
Do not close to fire, do not use in high temperature
Do not invert positive and negative pole
Do not contact with metal in case of short circuit
Do not insert sharp objects into battery
Do not beat battery
Do not stand on battery
Do not use battery out of rules
Do not dispose battery or change internal structure
Do not submerge battery in water, please keep dry in
storage and do not contact with water in use
Please charge battery with charger following IEC60601-
1 & IEC62133 Standards provide by us
Do not mix battery with ones not provided by our
company
Do not charge battery with broken charger.