User's Manual

Wireless Digital Flat Panel Detector Mars1717X
60 User Manual of Mars1717X
The correction maps should be enabled before using hardware correction, read status
first, then choose the gain or defect, enable the map by clicking Active button.
4.4.6. Local Page
In this page user can open the image files saved in local, the file formate can be dcm, raw, tiff, dft.
When the software is disconnected to detector, the file still can be opened.
or double click the file.
The tiff file will be opened directly. For the raw file or dft file there will be a dialog to select image
size. Select correct size to open image files. If the file is not correct user will get an error message.
The pixel matrix is defined as below:
Active area : 4267*4267
What needs to be notice is only the active area pixels will be displayed when use load file funtion,
the value of dummy pixels and empty channels will be filled by 65535.