User's Manual

Wireless Digital Flat Panel Detector Mars1717X
16 User Manual of Mars1717X
Do not operate close to fire, do not use in high
temperatures
Do not invert positive and negative poles
Do not contact with metal in case of a short circuit
Do not insert sharp objects into the battery
Do not hit the battery
Do not stand on the battery
Do not use the battery for purposes other than those
stipulated in the rules
Do not dispose of the battery or change its internal
structure
Do not submerge the battery in water; please keep it
dry in storage and do not contact with water while in use
Please charge the battery with the charger provided by
Manufacturer
Do not mix the battery with ones not provided by
Manufacturer
Do not charge the battery with a broken charger.
Charge the battery regularly to avoid over-discharge
failure.
Do not use the battery when it is severe ballooning.
1.2. Notes for Use
When using the product, take the following precautions. Otherwise, problems may occur and the
product may not function correctly.
Before exposure
Be sure to check the connection of all the parts are set properly & check the detector is kept
up.
Be sure to check the product daily and confirm it work properly.
Sudden heating of the room in cold areas will cause condensation on the product. In this case,
wait until the condensation evaporates before performing an exposure. If it is used when
condensation is formed, problems may occur in the quality of captured images. When an air-
conditioner is used, be sure to raise/lower the temperature gradually to prevent condensation.