User's Manual

Flat Panel Detector Luna1012X
68 User Manual of Luna1012X
Word “ALL” indicates the file contains the firmware upgrade file for all units.
Luna1012X_IMAGE_44_ARM_20XX_XX_XX.ifrm
Word “ARM” indicates the file is only for ARM.
Luna1012X_IMAGE_44_FPGA_20XX_XX_XX.ifrm
Word “FPGA” indicates the file is only for FPGA.
Luna1012X_IMAGE_44_MCU_20XX_XX_XX.ifrm
Word “MCU” indicates the file is only for MCU.
User can choose one of these files as required to start the upgrade.
Choose the file that needs to be upgraded, and must check the package info to confirm if it is
correct.
Note:
1. There is a progress bar for indication. Make sure battery is inserted and battery capacity is over
25%
2. Please make sure that iDetector shows “Ready”. It can also be checked by click “Config” button,
there is firmware version.