User's Manual
Table Of Contents
- Contents
- Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- Appendix (For Service Personnel Only)
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Parameter Description Can be Modied
Ftp Upload Host IP FTP upload server IP; keep the same as Host IP Yes
Ftp Upload Host Port FTP upload server Port; keep the same as Host
Port
Yes
Network Settings
Button Description
Add Add the information of SSID and the AP Key
Del Delete the information of SSID and the AP Key
Up Move up the AP information
Down Move down the AP information
Select Select the AP
Read Cong Read the parameters of the AP information when the detector is set as AP
Write Cong Write the parameters of the AP information when the detector is set as AP
Read Wi Status Read the WIFI status of the current detector
Scan from FPD Scan the AP
Appendix (For Service Personnel Only)
IV AJ4312 | 2020-02-10