User's Manual
Table Of Contents
- Contents
- Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- Appendix (For Service Personnel Only)
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
2 Overview
The TRIMAX 43C Detector is a cassette-size, wireless x-ray at panel detector based on
amorphous silicon thin-lm transistor technologies. It is developed to provide the
highest quality of radiographic images with an active matrix of 3072×3072 with 139 um
pixel pitch. The detector supports wireless communication between the panel and the
workstation and is powered by an internal battery.
Scope
This manual contains information about the TRIMAX 43C. Information in the manual,
including the illustrations, is based on a prototype. If your system conguration does
not have features described in this manual, the information does not apply to your
detector.
Features
• Wireless static at panel detector used for general radiography
• Cassette-size
• Sync-shot exposure trigger
• CsI scintillation screen
• Easy-to-change cable and easy-to-update rmware
• Battery recycling
AJ4312 | 2020-02-10
2-1