User's Manual
Table Of Contents
- Contents
- Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- Appendix (For Service Personnel Only)
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Handling
Handling
WARNING:
No modication is allowed. Never disassemble or modify the product to
avoid re or electric shock.
The product incorporates parts that may be hazardous or cause electric
shock Touching them may cause death or serious injury.
WARNING:
Do not place an object on top of the product. The object may fall and cause
an injury.
Metal objects such as needles or clips that fall into the product or spilled
liquid may result in re or electric shock.
WARNING:
Do not strike, drop, or cause a strong jolt to the product to prevent damage
and avoid re or electric shock.
Handling
WARNING:
Do not place the product and pointed objects together to prevent damage.
If so, it should be used in Bucky.
WARNING:
Have the patient take a xed posture and do not let the patient touch parts
unnecessarily.
If the patient touches connectors or switches, it may result in electric shock
or malfunction.
Safety and Regulatory Information
1-8 AJ4312 | 2020-02-10