User's Manual
Table Of Contents
- Contents
- Notices and Conventions
- 1 Safety and Regulatory Information
- 2 Overview
- 3 Installation
- 4 Operation
- Appendix (For Service Personnel Only)
- Software and Settings
- Operating Modes
- Software Installation
- Set the Connection Mode
- Shortcuts
- Establish a Connection with the Detector
- Configure the Detector
- Correction and Calibration Template Generation
- Image Check and Upload
- Defect Template Check and Modification
- Correction and Calibration Management
- Update the Firmware
- Publication History
Power Supply
WARNING:
Do not operate the product with a power supply other than the one
indicated on the rating label to avoid re or electric shock.
WARNING:
Do not handle the product with wet hands to avoid electric shock that could
result in death or serious injury.
WARNING:
Do not place heavy object on cables and cords. Co not pull, bend, bundle, or
step on them to prevent damage to the sheath. Do not alter them.
Avoid damage to the cords, which could result in re or electric shock.
WARNING:
Do not supply power from the same AC outlet to more than one product to
avoid re or electric shock.
WARNING:
Do not turn on system power when condensation has formed on the
equipment to avoid re or electric shock.
Power Supply
WARNING:
Do not connect multiple portable socket outlets or extension cords to the
system to avoid re or electric shock.
WARNING:
Connect this product only to a power supply with protective earth to avoid
re or electric shock.
WARNING:
Do not use the adapter cord when connecting the panel to a patient.
Safety and Regulatory Information
1-6 AJ4312 | 2020-02-10