User's Manual

4. Software Setup
iRay Technology Co., Ltd. 47
4.7.2 Acquire Page
This page is used to acquire image under different work mode, and user can choose
correction mode too. When acquire image finished there will be a preview image
shown on the screen.The propertities of image is displayed on the left of preview
image. On the right of preview image there is a list to show thumbnail of images.
User can select it and double click to see for detail. User can rotate, reverse or
mirror image. User can get the value of AVG and SNR by ROI tool. The acquired
images can be save as raw, tiff or dicom formats. Both raw and tiff formats support
single frame and continuous frames save.
Status bar shows detector’s serial number, the current task and state of detector, and
feedback information of command. Status bar is also can be seen in other pages,
and they are all same.
Item Description
SN SN number of current connected detectors
State Detectors state, e.g. busy, ready
Task the current task of detector
Message feedback information of command, e.g. succeed, failed
Functions in this Page.