User's Manual

4. Software Setup
iRay Technology Co., Ltd. 37
4.5 Client Mode Connection
To complete wireless connection configuration, user has to finish actions listed below.
1. Setup physical
connection
 Connect one end of
Gigabit Ethernet Cable to
Workstation,

Connect another end to
LAN port of External
2. AP setup
 Set up the Wireless AP
to:
 IP address 192.168.8.188
 Subnet Mask
255.255.255.0
 The setting process will
be viable depends on AP
model
 Here shows the Netgear
Wireless Router setup

Open local network
management interface