User's Manual

3. Installation
iRay Technology Co., Ltd. 31
3.1.2 Attach DC Power
Please see below for DC power installation.
 The DC source is connected to the
power interface on the back of the
detector, the polarity of the power
supply is marked in the figure on the
right
3.1.4 Indicator
After booting up, users can check the status indication of LED as follows.
LED indicator is as table:
Items Color Descriptions
Power
Green Battery capacity is 11%~100%
Orange Battery capacity is 6%~10%
Orange (blinking）
Battery capacity is 0%~5%
Green(blinking) The battery is charging
Link
Green WIFI connecting is normal
Orange WIFI link is lost
Status
Green SDK is OK
Orange
SDK is disconnect or
firmware update
Green(blinking) Exposure indication
Orange (blinking) FPD Error