User's Manual

1. Safety
iRay Technology Co., Ltd. 13
CAUTION
Handling
 Handle the equipment carefully.
 Do not submerge the equipment in water.
 The internal image sensor may be damaged if
something hits against it or it is dropped.
 Do not place excessive weight on the equipment.
 Otherwise, the internal image sensor may be damaged
and image may be incorrect.

 <Load Limit>
 Uniform load：150 kg over the whole area of the
detector surface.
 Local load：100 kg on an area 4 cm diameter.
 Be sure to use the equipment on a protected foam.
Otherwise, the internal image sensor may be damaged.
Be sure to securely hold the detector while using it in
upright positions. Otherwise, the detector may fall
over, resulting in injury to the user or patient, or may
flip over, resulting in damage to the inner device.
Keep the same load (same pressure) on the detector when
acquiring the image. Otherwise, the image will be incorrect.
CAUTION
 Do not close to fire, do not use in high temperature
 Do not invert positive and negative pole
 Do not contact with metal in case of short circuit
 Do not insert sharp objects into battery
 Do not beat battery
 Do not stand on battery
 Do not use battery out of rules
 Do not dispose battery or change internal structure
 Do not submerge battery in water, please keep dry in
storage and do not contact with water in use
 Please charge battery with charger following IEC60601-
1 & IEC62133 Standards provide by us
 Do not mix battery with ones not provided by our
company
 Do not charge battery with broken charger.