User's Manual Part 2

2-54

16. Messages and Alerts area

NOTE

• If the touchscreen is not responsive or blank, remove from use and refer the monitor to

qualified service personnel.

2.2.11.5 Using Control Switch Hard Keys

1. SETTINGS: Access monitor setup menus

2. ALARM OFF - Standby button: Indefinitely pauses all alarms and terminates

automatic NIBP measurements

3. TRENDS: Trend Screen access and adjustment

4. PRINT: Prints to optional recorder in the Base Station

5. NIBP START/STOP: Initiates a NIBP measurement when one is not in progress, or

stops an NIBP in progress. Holding START/STOP button for 3 seconds initiates STAT

readings.

6. AUDIO ALARM OFF – Alarm Silence button: multi-function audible alarm control,

resets sounding of alarm, pauses for 120 seconds the alarm sound, or re-enables alarm

sound capability.

2.2.11.6 Using Menus (Touch Screen controls)

1. Menu Title: Description correlating the menu choices

2. SELECTION BUTTON: Touching will make a desired selection or open up a new menu

3. DROP DOWN BUTTON 1: Touching will enable a pop up menu to make a selection

from multiple choices

4. DROP DOWN BUTTON 2: Touching will enable a pop up menu to make a selection

from multiple choices

5. BACK BUTTON: Closes menu and returns user to previous menu or main monitoring

screen

6. TOGGLE SWITCH: Touching will toggle the desired selection between Enabled and

Disabled