User's Manual Part 1
2-17
2. Getting Started
2.1. About 3880
2.1.1. Introduction
The 3880 system is a Non-Magnetic multi-parameter patient monitor to continuously monitor
patients throughout the entire MRI care cycle. The 3880 monitor is comprised of the 3880 MRI
Monitor, 3881 ePOD, 3882 oPOD and an optional 3885-T Remote Tablet with 3885-B Base
Station. Further options include, CO2, Temperature, and the 3886 Multi-Gas unit. The wireless
3880 solution is designed to be small, simple and light weight making it a practical intra-
department patient transportation monitor for the MRI suite. This system is not intended for
patient transportation between hospitals. The 3880 system is equipped to support an entire
nursing shift with greater than 8 hours of typical battery operation. The 3880 monitor is Non-
Magnetic* and its MRI specific accessories are intended for the harsh MRI examination
procedures and environment including ultra-high-field applications.
The 3880 patient monitoring solution utilizes non-magnetic wireless technology which improves
safety, usability and data connectivity. The system utilizes wireless ECG and SpO
2
PODs which
simplify patient workflow and setup by reducing the potential for loops and sensor damage.
• Standard Features
1. Small portable design weighing approximately 8.9 lbs (4 Kg)
2. Non-Magnetic and MRI conditional multi-parameter monitor up to 30,000 Gauss
and 4 W/Kg whole body average SAR
3. 10 inch color touchscreen user interface to simplify operation and cleanliness
4. Integrated wireless ECG and SpO
2
POD charging
5. Wireless ECG and SpO
2
POD enabled
6. 2.4 GHz wireless communication enabled for optional remote viewing
7. Integrated non-invasive blood pressure monitoring
8. Masimo SET SpO
2
monitoring
9. Integrated MRI system gating enabled
10. Tri-Color Alarm Dome Light
11. ECG waveform gradient removal algorithms
12. Minimum of 8 hour battery operation
13. Instant On system start (< 4 seconds)
* Magnetic field ≤ 30,000 Gauss (3.0T)
• Optional Features
1. Integrated Sidestream Capnography monitoring
2. Integrated Sidestream Capnography or external 3886 Multi-Gas CO2/Anesthetic
Agent monitoring
3. O2 monitoring, with Agent Unit
4. Integrated temperature monitoring
5. 10 inch color Touchscreen Tablet
6. Base station
7. Thermal Strip Chart Recorder
8. HDMI output
9. Mount for pole and bedrail operation