Data Sheet

IRONBOY USER MANUAL Ver.1.03_Eng
43
⑤ Section 5 : This is reset button. All setting
values will be removed by this button.
You will see the message for reset setting as
right picture for confirmation.
If you select "Yes", current value will be
removed and reset to the initial status.
Click "Save" button after the setting. Then, it will revert to the main screen.
If robot ID in the above setting is out of 1~253, you
will see message as left picture and the it will not be
saved. Please put the number in the range of 1~253
again.
If any value for the keys are out of 0~199 in left
section of button, you will see the message as right
picture. Put correct motion number between 0~199.
(Exception : 255 for Stop key(●))
If any value for the keys are out of 0~199 in Right section
of button, you will see the message as left picture. Put
correct motion number between 0~199.
When you press back button on your smart phone, you will
see message in right picture. If you select "Yes", you can
exit.