Data Sheet

IRONBOY USER MANUAL Ver.1.03_Eng

5.2. Setting

(1) Button Setting

Click App Icon.

In case Bluetooth is inactivated on your smart phone, you will see Bluetooth approval request as below.

If Bluetooth is already activated, you will see main screen below.

[Bluetooth Approval Request] [Main Screen]

Press key on Main screen, then you will see below setting page.

① Section 1 : Motion 0~199 can be assigned to 9 different figure keys freely. The only exception is

“●” and this key can be assigned for 255(Stop) motion only.

② Section 2 : In this section, motions 0~199 can be assigned to 200 different keys freely.

③ Section 3 : This section is for Robot ID. Robot ID can be assigned between 1~253. This robot ID

should be same as Robot ID of the robot you set in Total manager.

④ Section 4 : This is Default value button. If this

button is pressed, factory values will be put into

all buttons.

You will see the message for default setting as

right picture for confirmation.

If you select "Yes", factory values will be stored in

all buttons and "1" will be assigned as robot ID

as below.

Click "Yes"