PC USB Interface Board

IR-USB02 PC USB Interface Board

 The 2

generation of PC USB Interface board based on previous IR-USB01

 Essential accessory at first purchase of mightyZAP actuators

 USB to TTL/RS-485 converter between PC and actuators

 Interface board to control parameters in user’s PC. Dedicated software to be provided.

After connecting the PC and the actuator through IR-USB02(PC USB Interface), you can set various

parameters, perform basic operation tests, and update the firmware through the dedicated

mightyZAP Manager software.

Composition How to connect

Features

 For Windows compatible mightyZAP manager

software (downloadable from our website at

free)

 Setting various operation parameters &

memory parameters

– Baud rate, ID, Delay, Stroke limit,

Compliance margin setting

– Goal Speed, Goal Position, Goal Current,

LED Alarm, Shutdown setting

– Acceleration / Deceleration Setting

 Motion Test

 System reset and Firmware update

 Motor Operating Rate, Voltage, Temperature,

Position, Current real time monitoring

[mightZAP manager software]

Thank you for your attention.

 Power :12V or 7.4V according to actuator’s

input voltage.

 Current Capacity: 4A

 Use 5pin Micro USB cable which support data

transfer. (do not use “Charge only” wire)



USB0

PC USB Interface Board x 1EA

 Power Terminal x 1EA

 Size : 5.2x3.0x1.2mm (LxWxH)

※ USB data cable and actuator wires are

not included in the package

Micro 5pin

USB Cable

from PC

Power

Terminal

Actuator

wire (TTL

or RS-485)