Manual

IR-USB01 User Manual V1.0
5 / 9
How to install Driver for IR-USB01
The driver of IR-USB01(FTDI Driver) will be installed automatically when IR-USB01 is connected with PC via USB. To check if
IR-USB01 driver is installed properly in user's PC, follow below process. (Just in case that driver is not installed automatically,
user may follow "Manual installation" process in next chapter.)
1. Connect IR-USB01 with PC using USB. (Micro B-type(standard 5pin) cable)
2. "Right click" of mouse on "My Computer" icon. Then, select "Manage" menu on popup menu.
3. Check if "USB Serial Converter" exists in "Universal Serial Bus controller" menu.