Manual

IR-USB01 User Manual V1.0
3 / 9
Board Layout
Part name Descriptions
Indicator LED USB connection status, Power status, TXD(data writing) & RXD(data reading) status
Power Input 7.4V or 12V input
3P connector For PT series (TTL communication) mightyZAP
4P connector For F series (RS-485 communication) mightyZAP
USB communication
PC USB connection via Micro B-type(standard 5pin) cable
Caution
Proper Power Input!
Make sure polarity (+/-) when connect the power (see the back side of
PCB). Improper polarity connection brings damage of product.
Make sure to apply correct input voltage corresponding the voltage
user's servo.(7.4V or 12V)
4Pconnector
(RS
-
485)
3Pconnector
(TTL)
power
Input
+
USB
connection
Indicator LED