Manual

IR-USB01 User Manual V1.0
2 / 9
Overview
[IR-USB01]
IR-USB01 is an USB interface which connects mightyZAP linear servo motor and user's PC via USB port for various setting of
servo motor. Input power needs to be supplied via power socket (Input power should be same as the input voltage of servo
motor) and it supports TTL and RS-485 protocol. As standard accessory, the wire harness for TTL/PWM(3pin connector) and
RS-485(4pinconnector) protocol are included in the package.
Memory Setting
Parameter Setting - Reading & Writing
Error Indicator
System Reset
Firmware Update
※ NOTE : IR-USB01 does NOT include USB cable for PC connection. Any USB Micro B-type(Standard 5pin) cable(for Android
smart phone) can be used without problem.
Specification
Size : 29.5 X 64 X 11mm
Input power : 7.4V(L7series, D7series) , 12V (L12series, D12series)
Servo connection port : RS-485(F version connection), TTL(PT version connection)
PC communication interface : USB Micro B-type(Android standard 5pin)
Communication speed : 57600bps(default)
Operating software : mightyZAP Servo Manager
※ To use PT series(TTL/PWM) and F series(RS-485) at the same time together, different ID setting is required.
Series
Series