Raspberry Pi HAT

IR-STS02 Raspberry Pi HAT
IR-STS02 is a Raspberry Pi add-On board which is compatible with Raspberry Pi B3 or Raspberry Pi Zero.
With TTL/RS-485/PWM communication interface, power connector and GPIO pins, user is able to control
mightyZAP on Raspberry Pie.
Composition How to connect
Features
 Raspberry Pi add-On board which is compatible with Raspberry Pi B3 or Raspberry Pi Zero.
 RS-485/TTL/PWM Interface
 7.4V or 12V input (According to actuator’s input voltage)
 Raspberry Pi GPIO pins
 Python API/Library available.
Thank you for your attention.
 Power :12V or 7.4V according to actuator’s
input voltage.
 Use 5pin Micro USB cable which support data
transfer. (do not use “Charge only” wire)
 IR-STS02 Raspberry Pi HAT x 1EA