Metal bracket for mightyZAP

IR-MB04 Metal Bracket (Vertical Type)

 For mounting 26 and 27mm Stroke mightyZAP actuators vertically onto applications.

 For longer stroke mightyZAP, use IR-MB03 or Body case tapping holes.

 Referring to published drawings, user is also able to make this bracket at their end if necessary.



Bracket material: Stainless Steel

Composition (IR-MB04) How to mount

[Bottom Side Mounting] [Front Side Mounting]

Thank you for your attention.

Make sure to use M2.5 spring washer

to prevent damage.

M2.0

x L4

Flat Head Screw

M2.

x L

Screw

ing Washer M2.5

8 Socket Bolts

M3.0 Nuts

Bracket Plate

Proper space must be secured to avoid the protruding

bolt head in the front of the actuator.

(For Bracket Plate)

2pcs of M3.0 x 8 Bolts are for Bracket plate. Apply

4pcs of proper M3.0 screws at your end according to

your condition.

PAGE 1
IR-MB04 Metal Bracket (Vertical Type)     For mounting 26 and 27mm Stroke mightyZAP actuators vertically onto applications. For longer stroke mightyZAP, use IR-MB03 or Body case tapping holes. Referring to published drawings, user is also able to make this bracket at their end if necessary. Bracket material: Stainless Steel Composition (IR-MB04) How to mount M2.0 x L4 Flat Head Screw (For Bracket Plate) Spring Washer M2.5 M2.5 x L5 Screw Make sure to use M2.5 spring washer to prevent damage.