Datasheet

Architectural and Engineering Specification
IQM30NE-B5 Page 4 of 11 Revision: D400001 (12152011)
EE. The IP dome camera shall provide a fully programmable motion detection area with
adjustments for sensitivity and size to detect motion in various lighting conditions.
FF. The IP dome camera shall provide a video flip and rotate function to allow the image to be
digitally rotated 180 degrees, or to flip the image horizontally or vertically.
GG. The IP dome camera shall provide selectable AC Lighting control for 50Hz or 60Hz lighting.
HH. The IP dome camera shall transmit full duplex, bi-directional (two-way) audio that is
synchronized with the H.264 video stream.
II. The IP dome camera shall support DTS (Direct-To-Storage) for recording of time lapse and event
recording using network attached storage.
JJ. The IP dome camera shall have an event handler allowing the camera to send an image or video
clip to an FTP site, email address, and or network attached storage when receiving an internally
or externally generated event.
KK. The IP dome camera shall support the following licensed On-Camera IQapps.
1. IQaccess: Software that enables multiple users to receive alerts via a pop-up window
when the camera receives a hardware or software trigger.
LL. The IP dome camera shall be FCC Part 15 Class B, CE, and RoHS compliant.
MM. The IP dome camera shall operate within an ambient temperature of -20˚C (-4˚F) – to
+50˚C (+122˚F).
2.4 NETWORKING REQUIREMENTS
A. The IP dome camera shall incorporate a built-in web server allowing full control and
configuration of the camera.
B. The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant.
C. The IP dome camera shall have a 100 Mbps Ethernet RJ-45 connection that can deliver data at a
maximum rate of 35 Mbps.