Datasheet

Architectural and Engineering Specification
IQM30NE-B5 Page 3 of 11 Revision: D400001 (12152011)
R. The IP dome camera shall have an integrated 3-13mm megapixel IR corrected varifocal lens with
F1.4, and 1/3” optical format.
S. The IP dome camera shall provide a cast-aluminum housing, polycarbonate dome and inner
liner.
T. The IP dome camera shall provide protection against water and dust up to IP66 / NEMA4
standards.
U. The IP dome camera shall be designed to be surface mounted to a wall or ceiling and wall
mounted with optional accessories.
V. The IP dome camera shall be designed to be mounted to a single or double gang outlet box with
optional accessory.
W. The IP dome camera shall have a 3-axis gimbal providing 360˚pan, 90˚ tilt and 350˚ azimuth for
easy camera positioning.
X. The IP dome camera minimum illumination requirement to produce an image in color mode will
be 0.10 lux (0.01 fc) with an F1.4 lens.
Y. The IP dome camera shall provide a motorized IR filter that will automatically switch from color
to monochrome enhancing low lighting or in applications where IR illumination is utilized.
Z. The IP dome camera shall require less than 0.05 lux (0.005 fc) to produce a monochrome image
when in night mode.
AA. The IP dome camera shall be sensitive from 800nm to 940nm IR illumination.
BB. The IP dome camera shall have a feature (LIGHTGRABBER™II) that enhances camera sensitivity
by increasing the integration time of the CMOS sensor.
CC. The IP dome camera shall provide automatic white balance, automatic exposure, gain control,
electronic shutter, and backlight compensation.
DD. The IP dome camera shall provide user configurable saturation, contrast, brightness, and
sharpness controls from the webpage interface.