Installation Guide

After cleaning, apply a bead of silicone sealant between the top flange (or lip) of the
sink and the coun
tertop to create a watertight seal. Clean excess silicone
immediately. Verify the overall appearance and check for levelness to ensure correct
drainage.
Carefully place the countertop and verify that it is level.
IMPORTANT: Due to the dimensional variation from the fireclay
manufacturing process, IPT SINK COMPANY does not offer the cutout template for
fireclay sinks. It is essential that prior to installation, you discuss with your
installer and agree on the final appearance. Cabinet should NOT be cut or
fabricated without the sink.
IMPORTANT: Apron front sinks from IPT SINK COMPANY should only be fastened
to a solid surface countertop (i.e., granite, Corian® or Silestone®).
Connect water supply and drainage system per manufacturer’s instructions.
Run water to test for leakage.
iptsink.com