Installation Guide

Painter’s Tape
Level
Framing Square |Shims or Cabinet Fillers Clamps
Construction Adhesive Sealant
(stone, marble, and granite silicone caulk are recommended)
Support Framing Material (11/4 inch (32mm) Max Thickness)
Screws (recommended by countertop manufacturer)
Measure the size of the sink, including the front apron. Cut the
face of the cabinet to allow the sink to slide in.
Use painter
’s tape for marking and cutting purpose to protect
the cabinet and sink from damage.
IMPORTANT: Due to the dimensional variation from the
fireclay manufacturing process, IPT SINK COMPANY does not
offer the cutout template for fireclay sinks. It is essential that
prior to installation, you discuss with your installer and agree on
the final appearance. Cabinet should NOT be cut or fabricated
without the sink.
Measure the size of the sink, including the front apron. Cut the
counter top to allow the sink to slide in.
iptsink.com