Installation Guide

iptsink.com

After cleaning, apply a bead of silicone sealant between the top flange (or lip) of the sink and the countertop

to create a watertight seal. Clean excess silicone immediately. Verify the overall appearance and check for

levelness to ensure correct drainage.

Carefully place the countertop and verify that it is level.

IMPORTANT:

Due to the dimensional variation from the fireclay manufacturing process, IPT Sink Company does

not offer the cutout template for fireclay sinks. It is essential that prior to installation, you discuss with your

installer and agree on the final appearance. Cabinet should NOT be cut or fabricated without the sink.

IMPORTANT:

Apron front sinks from IPT Sink Company should only be fastened to a solid surface countertop (i.e.,

granite, Corian® or Silestone®).

Connect water supply and drainage system per manufacturer’s instructions. Run water to test for leakage.

STEP5: COUNTERTOP INSTALLATION

FINAL STEP

Apply Silicone Sealant After Cleaning the

Sink Edge and Countertop

Apply Silicone Sealant Where the Sink Meets

the Countertop and Cabinet