Product Manual

Specifications Information and Repair Parts Manual 394A-95 & 394B-95
Repair Parts List
Ref.
No. Description 394A-95 394B-95 Qty.
1 Casing 2113-003-01 2113-003-01 1
2 Volute 2184-002-01 2184-002-01 1
3 Impeller kit (includes 3, 4, 18 & 21) 394A-010-98 394A-010-98 1
4 Impeller shim set (also included w/Ref. #3) 1664-000-90 1664-000-90 1
5 & 6 Seal assembly, Viton/Silicon Carbide 1640-167-90 1640-167-90 1
7 O-ring size #276, Buna-N (included w/Ref. #30) See Ref #30 See Ref #30 1
8 Adapter 1990-031-01 1990-031-01 1
9 1/2"-13 x 4-3/4" Hex bolt * * 4
10 ½" Flat washer * * 4
11 1/4"-20 x 7/8" Hex screw (stainless steel) * * 2
12 1/2"-13 Hex nut * * 4
13 3/8"-16 x 1-1/4" Hex screw * N/A 4
13 1/2"-13 x 1-1/2" Hex screw N/A * 4
14 3/8" Helical spring lock washer * N/A 4
14 ½" Helical spring lock washer N/A * 4
15 3/4"-14 NPT Pipe plug * * 2
16 Check valve assembly, Neoprene 3590-070-90 3590-070-90 1
(Also included w/Ref #30, no hardware)
17 Motor NEMA 184JM, 3450 RPM, 7.l5 HP, 3 PH 1626-353-00 N/A 1
17 Motor NEMA 213JM, 3450 RPM, 7.5 HP, 1 PH N/A 1626-079-00 1
18 Impeller screw (included w/Ref. #3) See Ref #3 See Ref #3 1
19 Shaft sleeve 1555-140-02 1555-140-02 1
20 #10-24 x 3/8" Flat head machine screw * * 1
21 Impeller key (also included w/Ref. #3) 1471-030-00 1471-030-00 1
22 1/8"-27 Pipe plug * * 1
23 Wear plate 2182-004-01 2182004-01 1
24 5/16"-18 x ½" Flat head machine screw * * 2
25 O-ring size #205, Buna-N (included w/Ref #30) See Ref # 30 See Ref # 30 1
26 Clean out cover 2115-002-01 2115-002-01 1
27 Clean out gasket, Neoprene 2115-003-00 2115-003-00 1
(Also included w/Ref. #30)
28 Clean out handle 1601-000-00 1601-000-00 2
29 3/8" Flat washer * * 2
30 Gasket kit Buna-N (includes 7, 16, 25 & 27) 394A-300-90 394A-300-90 1
31 Suction strainer 1681-000-00 1681-000-00 1
(*) Standard hardware item, available locally
-5-