Product Manual

Specifications Information and Repair Parts Manual 393A-95 and 393B-95
For Repair Parts, contact dealer where pump was purchased.
Ple ase provide following info rm a tion :
-Model num ber
-Serial num ber (if a ny)
-Part description and nu m ber as shown in parts list
Figure 4 - Repair Parts Illustration
Repair Parts List
Ref. Part Numbers for Models:
Number Description 393A-95 393B-95 Quantity
1 Casing 2112-001-02 2112-001-02 1
2 Volute 2182-002-01 2182-002-01 1
3 Impeller Kit (includes: 3,4,18 & 21) 3935-011-98 3935-011-98 1
4 Impeller shim set package 1664-000-90 1664-000-90 1
5 & 6 †Seal assembly, Viton and Silicon Carbide 1640-167-90 1640-167-90 1
7 O-ring gasket #268, Buna N See Ref. #26 See Ref. #26 1
8 Adapter 3655-030-01 3655-030-01 1
9 3/8"-16 UNC x 3-1/2" hex hd bolt * * 4
10 3/8" flat washer * * 4
11 #10-24 x 7/8" Machine Screw, SS * * 2
12 3/8"-16 hex nut * * 4
13 3/8"-16 x 1-1/4" hex hd cap screw * * 4
14 3/8" Helical split lock washer * * 4
15 ½"-14 NPT pipe plug * * 2
16 Check valve, Buna N (also incl. W/Ref #26) 1609-002-00 1609-002-00 1
17 Motor NEMA 184JM 3450 RPM 5 HP 3 PH 1626-352-00 N/A 1
17 Motor NEMA 184JM 3450 RPM 5 HP 1 PH N/A 1626-078-00 1
18 Impeller screw (included w/Ref. #3) See Ref #3 See Ref #3 1
19 Shaft sleeve 1555-140-02 1555-140-02 1
20 Suction strainer 1679-001-00 1679-001-00 1
21 Impeller key (also included w/Ref. #3) 1471-030-00 1471-030-00 1
22 1/8" pipe plug * * 1
23 Wear plate 3655-032-01 3655-032-01 1
24 5/16"-18 x ½" Flat head machine screw * * 2
25 O-ring #205 Buna-N (included w/Ref. #26) See Ref #26 See Ref #26 1
26 Gasket kit Buna-N (includes 7,16 & 25) 393A-300-90 393A-300-90 1
(*) Standard hardware item, available locally.
(†) Seal cartridge and seat available as set only.
NOTE: When replacing a seal assembly, a new #205 O-ring (Part No. 3150-301-00) should also be replaced.
-3-