Washer User Manual

ManualsBrandsIPSO ManualsWasherCHM2097N

5-08-51R3

October 2011

Refer to Installation manual for full instructions.

On-Premise

Laundry

Planning

Handbook

IWF Washer-Extractors

CHM2097N

Summary of content (75 pages)

PAGE 1
On-Premise Laundry Planning Handbook CHM2097N IWF Washer-Extractors Refer to Installation manual for full instructions.
PAGE 2
Table of Contents Washer-Extractors ................................................................... Introduction............................................................................ Model Identification - IWF Washer-Extractors ................. Specifications and Dimensions - Model IWF014 (2-speed).............................................................................. Specifications and Dimensions - Model IWF018 (2-speed)....................................................................
PAGE 3
Washer-Extractors Introduction Model Identification - IWF Washer-Extractors CHM2097N Figure 1 5-08-51 IWF014 IWF030 IWF055 IWF018 IWF033 IWF075 IWF025 IWF040 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 2
PAGE 4
Washer-Extractors Specifications and Dimensions - Model IWF014 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 11.61 (295) Cylinder volume, ft.3 (l) 2.29 (65) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 31.37 (797) Front Loading Door opening size, in. (mm) 11.
PAGE 5
Washer-Extractors Machine Dimensions - Model IWF014 (2-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 0.2 in. (5 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 25.98 in. (660 mm) 10.75 in. (273 mm) 1.46 in. (37 mm) CHM2099NCHM2099N 2.72 in. (69 mm) 11.3 in. (287 mm) 26.37 in. (670 mm) 1.89 in. (48 mm) 28.66 in (728 mm) CHM2100N CHM2100N 8.9 in. (226 mm) 5.94 in. (151 mm) 2.95 in. (75 mm) 1 2 3 4 5 10 6 9 6.48 in. (164.5 mm) 27.42 in.
PAGE 6
Washer-Extractors 1.46 in. (37 mm) Mounting Bolt Hole Locations - Model IWF014 (2-speed) 25.4 in. (645 mm) 11.3 in. (287 mm) 22.05 in. (560 mm) 10.75 in. (273 mm) ø0.87 in. (ø22 mm) 1.89 in. (48 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 2.17 in. (55 mm) 25.98 in.
PAGE 7
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF014 (2-speed) Boiler Fed/Steam Heat 3 3+PE 1 10 6 14/2.5 P 380-415 50/60 3 3+N+PE 1 10 6 14/2.5 Q 200-240 50/60 3 3+PE 2.5 10 6 14/2.5 X 200-240 50/60 1/3 2/3+PE 2.5 10 6 14/2.
PAGE 8
Washer-Extractors Specifications and Dimensions - Model IWF018 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 (345) Cylinder volume, ft.3 (l) 2.57 (73) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 31.37 (797) Front Loading Door opening size, in. (mm) 11.
PAGE 9
Washer-Extractors Machine Dimensions - Model IWF018 (2-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 25.98 in. (660 mm) 0.2 in. (5 mm) 9.17 in. (233 mm) 1.46 in. (37 mm) CHM2099N CHM2099N 2.72 in. (69 mm) 12.87 in. (327 mm) 26.37 in. (670 mm) 1.89 in. (48 mm) 28.66 in (728 mm) CHM2100N CHM2100 5.94 in. (151 mm) 10 8.9 in. (226 mm) 1 2.95 in. (75 mm) 2 3 4 9 8 5 6.48 in. (164.5 mm) 27.42 in.
PAGE 10
Washer-Extractors 1.46 in. (37 mm) Mounting Bolt Hole Locations - Model IWF018 (2-speed) 25.4 in. (645 mm) 11.3 in. (287 mm) 22.05 in. (560 mm) 10.75 in. (273 mm) ø0.87 in. (ø22 mm) 1.89 in. (48 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 2.17 in. (55 mm) 25.98 in.
PAGE 11
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF018 (2-speed) Boiler Fed/Steam Heat 3 3+PE 1 10 6 14/2.5 P 380-415 50/60 3 3+N+PE 1 10 6 14/2.5 Q 200-240 50/60 3 3+PE 2.5 10 6 14/2.5 X 200-240 50/60 1/3 2/3+PE 2.5 10 6 14/2.
PAGE 12
Washer-Extractors Specifications and Dimensions - Model IWF025 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 (440) Cylinder volume, ft.3 (l) 3.35 (95) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 35.31 (897) Front Loading Door opening size, in. (mm) 11.
PAGE 13
Washer-Extractors Machine Dimensions - Model IWF025 (2-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 0.2 in. (5 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 25.98 in. (660 mm) 9.17 in. (233 mm) 1.46 in. (37 mm) CHM2099N CHM2099N 2.72 in. (69 mm) 16.81 in. (427 mm) 30.31 in. (770 mm) 1.89 in. (48 mm) 32.6 in (828 mm) CHM2100N CHM2100 8.9 in. (226 mm) 5.94 in. (151 mm) 1 2 2.95 in. (75 mm) 3 4 9 5 8 4.29 in. (109 mm) 29.41 in.
PAGE 14
Washer-Extractors 29.33 in. (745 mm) 16.81 in. (427 mm) ø0.87 in. (ø22 mm) 25.99 in. (660 mm) 9.17 in. (233 mm) 1.46 in. (37 mm) Mounting Bolt Hole Locations - Model IWF025 (2-speed) 1.89 in. (48 mm) 2.17 in. (55 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 25.98 in.
PAGE 15
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF025 (2-speed) Boiler Fed/Steam Heat 3 3+PE 1 10 6 14/2.5 P 380-415 50/60 3 3+N+PE 1 10 6 14/2.5 Q 200-240 50/60 3 3+PE 2.5 10 6 14/2.5 X 200-240 50/60 1/3 2/3+PE 2.5 10 6 14/2.
PAGE 16
Washer-Extractors Specifications and Dimensions - Models IWF030 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter, in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 (400) Cylinder volume, ft.3 (l) 4.66 (132) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 33.14 (842) Front Loading Door opening size, in. (mm) 11.
PAGE 17
Washer-Extractors Machine Dimensions - Model IWF030 (2-speed) 8.66 in. (220 mm) 17.91 in. (455 mm) 46.26 in. (1175 mm) 47.4 in. (1204 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 30.71 in. (780 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) CHM2117N CHM2117N 16.14 in. (410 mm) 29.92 in. (760 mm) 3.23 in. (82 mm) 1.3 in. (33 mm) 32.12 (816 mm) CHM2118N 13.07 in. (332 mm) 10.51 in. (267 mm) 1 7.95 in. (202 mm) 2 3 4.19 in. (106.5 mm) 10 4 9 5 33.19 in.
PAGE 18
Washer-Extractors 1.1 in. (28 mm) Mounting Bolt Hole Locations - Model IWF030 (2-speed) 28.78 in. (731 mm) 26.38 in. (670 mm) 16.14 in. (410 mm) 10.24 in. (260 mm) ø0.87 in. (ø22 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 19
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF030 (2-speed) Boiler Fed/Steam Heat 3 3+PE 1 10 6 14/2.5 P 380-415 50/60 3 3+N+PE 1 10 6 14/2.5 Q 200-240 50/60 3 3+PE 2.5 10 6 14/2.5 X 200-240 50/60 1/3 2/3+PE 2.5 10 6 14/2.
PAGE 20
Washer-Extractors Installation Anchoring to Metal Base Models IWF014, IWF018, IWF025 and IWF030 (2-speed) The machines must be fixed on a metal base which is securely anchored on a concrete base. Refer to Figure 11. CAUTION 1 Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.
PAGE 21
Washer-Extractors Directly to Concrete Base The machine must be anchored directly to concrete base. Refer to Figure 12. 1 5 2 4 3 CHM2104N 1 2 3 4 5 CHM2104N Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025), and .625 (M16) (Model IWF030) Washer 1.57 in. x 0.60 in. x 0.15 in. (40 mm x 17 mm x 4 mm) Bolt .5 in. (M12) (Models IWF014, IWF018 and IWF025), and .625 (M16) (Model IWF030) Concrete Base 9.48 in. (250 mm) (Models IWF014, IWF018 and IWF025), and 13.77 in.
PAGE 22
Washer-Extractors Specifications and Dimensions - Models IWF033 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter, in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17.74 (400) Cylinder volume, ft.3 (l) 5.12 (145) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 33.14 (842) Front Loading Door opening size, in. (mm) 15.
PAGE 23
Washer-Extractors Machine Dimensions - Model IWF033 (2-speed) 8.66 in. (220 mm) 15.35 in. (390 mm) 46.26 in. (1175 mm) 47.4 in. (1204 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 30.71 in. (780 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 29.92 in. (760 mm) CHM2120N CHM2120N 3.23 in. (82 mm) 10.51 in. (267 mm) 16.14 in. (410 mm) 1.3 in. (33 mm) 32.12 (816 mm) CHM2121N CHM2121N 13.07 in. (332 mm) 7.95 in. (202 mm) 1 2 4.17 in. (106 mm) 3 10 4 9 5 33.19 in.
PAGE 24
Washer-Extractors 1.1 in. (28 mm) Mounting Bolt Hole Locations - Model IWF033 (2-speed) 28.78 in. (731 mm) 26.38 in. (670 mm) 16.14 in. (410 mm) 10.24 in. (260 mm) ø0.87 in. (ø22 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 25
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF033 (2-speed) Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
PAGE 26
Washer-Extractors Specifications and Dimensions - Model IWF040 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter, in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19.68 (500) Cylinder volume, ft.3 (l) 6.39 (181) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 37.08 (942) Front Loading Door opening size, in. (mm) 15.
PAGE 27
Washer-Extractors Machine Dimensions - Model IWF040 (2-speed) 8.66 in. (220 mm) 15.35 in. (390 mm) 47.4 in. (1204 mm) 46.26 in. (1175 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 30.71 in. (780 mm) 3.23 in. (82 mm) CHM2120N CHM2120N 20.08 in. (510 mm) 33.86 in. (860 mm) 1.3 in. (33 mm) 36.07 in. (916 mm) CHM2121N CHM2121N 10.51 in. (267 mm) 13.07 in. (332 mm) 7.95 in. (202 mm) 1 4.17 in. (106 mm) 2 3 4 5 6 10 9 33.
PAGE 28
Washer-Extractors Mounting Bolt Hole Locations - Model IWF040 (2-speed) 32.72 in. (831 mm) 20.08 in. (510 mm) ø0.87 in. (ø22 mm) 30.31 in. (770 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 29
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF040 (2-speed) Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
PAGE 30
Washer-Extractors Specifications and Dimensions - Model IWF055 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter, in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 (530) Cylinder volume, ft.3 (l) 8.26 (234) Cabinet Overall height, in. (mm) 54.17 (1376) Overall width, in. (mm) 33.85 (860) Overall depth, in. (mm) 41.25 (1048) Front Loading Door opening size, in. (mm) 15.
PAGE 31
Washer-Extractors Machine Dimensions - Model IWF055 (2-speed) 1.93 in. (49 mm) 19.69 in. (500 mm) 53.19 in. (1351 mm) 54.17 in. (1376 mm) 9.49 in. (241 mm) 3.54 in. (90 mm) 354 in. (90 mm) 26.77 in. (680 mm) 33.86 in. (860 mm) 11.1 in. (282 mm) 1.97 in. (50 mm) CHM2126N CHM2126N 1 9.49 in. (241 mm) 1.97 in. (50 mm) 36.5 in. (927 mm) 0.55 in. (14 mm) 12.64 in. (321 mm) 20.39 in. (518 mm) 35.43 in. (900 mm) 38.76 in. (984.5 mm) CHM2127N CHM2127N 2 3 9.29 in. (236 mm) 4 5.94 in.
PAGE 32
Washer-Extractors Mounting Bolt Hole Locations - Model IWF055 (2-speed) 1.97 in. (50 mm) 35.43 in. (900 mm) 20.39 in. (518 mm) 11.1 in. (282 mm) ø1.06 in. (ø27 mm) 1.97 in. (50 mm) 3.54 in. (90 mm) 26.77 in. (680 mm) 3.54 in. (90 mm) 33.86 in.
PAGE 33
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF055 (2-speed) Boiler Fed/Steam Heat 3 3+PE 6 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 16 20 20 12/4.0 Q 200-240 50/60 3 3+PE 16 20 20 12/4.0 X 200-240 50/60 1/3 2/3+PE 16 20 20 12/4.
PAGE 34
Washer-Extractors Specifications and Dimensions - Model IWF075 (2-speed) Capacity (dry weight) Ratio (kg/l) 1:11 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter, in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 (537) Cylinder volume, ft.3 (l) 10.73 (304) Cabinet Overall height, in. (mm) 55.55 (1411) Overall width, in. (mm) 38.97 (990) Overall depth, in. (mm) 46.85 (1190) Front Loading Door opening size, in. (mm) 15.
PAGE 35
Washer-Extractors Machine Dimensions - IWF075 (2-speed) 54.59 in. (1387 mm) 2.81 in. (71.5 mm) 19.69 in. (500 mm) 55.57 in. (1412 mm) 9.76 in. (248 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 33.46 in. (850 mm) 38.98 in. (990 mm) 13.66 in. (347 mm) 2.64 in. (67 mm) CHM2153N 22.44 in. (570 mm) 40.55 in. (1030 mm) 1.81 in. (46 mm) 41.54 in. (1055 mm) CHM2153N 19.21 in. (488 mm) 0.26 in. (7 mm) 1 14.47 in. (368 mm) 43.8 in. (1113 mm) CHM2154 CHM2154N 2 9.72 in. (247 mm) 3 7.36 in.
PAGE 36
Washer-Extractors Mounting Bolt Hole Locations - Model IWF075 (2-speed) 2.64 in. (67 mm) 22.44 in. (570 mm) 40.55 in. (1030 mm) 13.66 in. (347 mm) ø1.06 in. (ø27 mm) 1.81 in. (46 mm) 2.76 in. (70 mm) 33.46 in. (850 mm) 38.98 in. (990 mm) 2.76 in.
PAGE 37
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF075 (2-speed) Boiler Fed/Steam Heat 3 3+PE 6 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 16 20 20 12/4.0 Q 200-240 50/60 3 3+PE 16 20 20 12/4.0 X 200-240 50/60 1/3 2/3+PE 16 20 20 12/4.
PAGE 38
Washer-Extractors Installation Anchoring to Metal Base Models IWF033, IWF040, IWF055 and IWF075 (2-speed) The machines must be fixed on a metal base which is securely anchored on a concrete base. Refer to Figure 22. CAUTION 1 Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.
PAGE 39
Washer-Extractors Anchoring to Concrete Base The machine must be anchored directly to concrete base. Refer to Figure 23. 1 5 2 4 3 CHM2104N 1 2 3 4 5 CHM2104N Nut .625 in. (M16) Washer 1.57 in. x 0.60 in. x 0.15 in. (40 mm x 17 mm x 4 mm) Bolt .625 in. (M16) Concrete Base 15.74 in. (400 mm) (Models IWF033 and IWF040), and 21.65 in. (550 mm) (Model IWF055), and 27.55 in. (700 mm) (Model IWF075) Machine Base Figure 23 IMPORTANT: Machine bolt should be re-checked on a quarterly basis.
PAGE 40
Washer-Extractors Specifications and Dimensions - Models IWF0014 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 13 lb. (5.9 kg) 1:10 14 lb. (6.5 kg) 1:9 15.87 lb. (7.2 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 11.61 (295) Cylinder volume, ft.3 (l) 2.29 (65) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 31.37 (797) Front Loading Door opening size, in. (mm) 11.
PAGE 41
Washer-Extractors Machine Dimensions - Model IWF014 (M-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 0.2 in. (5 mm) 25.98 in. (660 mm) 8.9 in. (226 mm) 10.75 in. (273 mm) CHM2099N 1.46 in. (37 mm) CHM2099N 2.72 in. (69 mm) 5.94 in. (151 mm) 1 2.95 in. (75 mm) 11.3 in. (287 mm) 1.89 in. (48 mm) 26.37 in. (670 mm) 28.66 in (728 mm) 2 3 10 CHM2100 CHM2100N 9 4 5 27.42 in. (696.5 mm) 29.41 in.
PAGE 42
Washer-Extractors Mounting Bolt Hole Locations - Model IWF014 (M-speed) 1.46 in. (37 mm) 25.4 in. (645 mm) 11.3 in. (287 mm) 22.05 in. (560 mm) 10.75 in. (273 mm) ø0.87 in. (ø22 mm) 1.89 in. (48 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 2.17 in. (55 mm) 25.98 in.
PAGE 43
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF014 (M-speed) Boiler Fed/Steam Heat 3 3+PE 3 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 7 15 16 14/2.5 Q 200-240 50/60 3 3+PE 7 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 7 15 16 14/2.
PAGE 44
Washer-Extractors Specifications and Dimensions - Model IWF018 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 14.33 lb. (6.9 kg) 1:10 16.09 lb. (7.3 kg) 1:9 18.51 lb. (8.4 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 13.58 (345) Cylinder volume, ft.3 (l) 2.57 (73) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 31.37 (797) Front Loading Door opening size, in. (mm) 11.
PAGE 45
Washer-Extractors Machine Dimensions - Model IWF018 (M-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 0.2 in. (5 mm) 1.46 in. (37 mm) 2.72 in. (69 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 25.98 in. (660 mm) CHM2135N CHM2135N 9.17 in. (233 mm) 12.87 in. (327 mm) 28.66 in (728 mm) 8.9 in. (226 mm) 5.94 in. (151 mm) 2.95 in. (75 mm) 1.89 in. (48 mm) 26.37 in. (670 mm) CHM2136N CHM2136N 1 2 3 10 4 9 8 27.42 in. (696.5 mm) 10.92 in.
PAGE 46
Washer-Extractors Mounting Bolt Hole Locations - Model IWF018 (M-speed) 1.46 in. (37 mm) 25.4 in. (645 mm) 11.3 in. (287 mm) 22.05 in. (560 mm) 10.75 in. (273 mm) ø0.87 in. (ø22 mm) 1.89 in. (48 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 2.17 in. (55 mm) 25.98 in.
PAGE 47
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF018 (M-speed) Boiler Fed/Steam Heat 3 3+PE 3 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 7 15 16 14/2.5 Q 200-240 50/60 3 3+PE 7 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 7 15 16 14/2.
PAGE 48
Washer-Extractors Specifications and Dimensions - Model IWF025 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 18.95 lb. (8.6 kg) 1:10 20.94 lb. (9.5 kg) 1:9 23.14 lb. (10.5 kg) Cylinder Cylinder diameter, in. (mm) 20.86 (530) Cylinder depth, in. (mm) 17.32 (440) Cylinder volume, ft.3 (l) 3.35 (95) Cabinet Overall height, in. (mm) 40.98 (1041) Overall width, in. (mm) 25.98 (660) Overall depth, in. (mm) 35.31 (897) Front Loading Door opening size, in. (mm) 11.
PAGE 49
Washer-Extractors Machine Dimensions - Model IWF025 (M-speed) 13.98 in. (355 mm) 40.98 in. (1041 mm) 39.92 in. (1014 mm) 8.66 in. (220 mm) 2.17 in. (55 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 0.2 in. (5 mm) 25.98 in. (660 mm) 8.9 in. (226 mm) 9.17 in. (233 mm) CHM2099N 1.46 in. (37 mm) CHM2099N 2.72 in. (69 mm) 5.94 in. (151 mm) 1 2.95 in. (75 mm) 16.81 in. (427 mm) 1.89 in. (48 mm) 30.31 in. (770 mm) 32.6 in (828 mm) 2 3 CHM2100 CHM2100N 10 9 4 5 27.42 in. (696.5 mm) 29.41 in.
PAGE 50
Washer-Extractors Mounting Bolt Hole Locations - Model IWF025 (M-speed) 1.46 in. (37 mm) 29.33 in. (745 mm) 25.99 in. (660 mm) 16.81 in. (427 mm) 9.17 in. (233 mm) ø0.87 in. (ø22 mm) 1.89 in. (48 mm) 2.17 in. (55 mm) 21.65 in. (550 mm) 2.17 in. (55 mm) 25.98 in.
PAGE 51
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF025 (M-speed) Boiler Fed/Steam Heat 3 3+PE 3 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 7 15 16 14/2.5 Q 200-240 50/60 3 3+PE 7 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 7 15 16 14/2.
PAGE 52
Washer-Extractors Specifications and Dimensions - Models IWF030 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 26.45 lb. (12 kg) 1:10 29.10 lb. (13.2 kg) 1:9 31.96 lb. (14.5 kg) Cylinder Cylinder diameter, in. (mm) 25.59 (650) Cylinder depth, in. (mm) 17.74 (400) Cylinder volume, ft.3 (l) 4.66 (132) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 33.14 (842) Front Loading Door opening size, in. (mm) 11.
PAGE 53
Washer-Extractors Machine Dimensions - Model IWF030 (M-speed) 8.66 in. (220 mm) 17.91 in. (455 mm) 46.26 in. (1175 mm) 47.4 in. (1204 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 30.71 in. (780 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) CHM2117N CHM2117N 16.14 in. (410 mm) 29.92 in. (760 mm) 3.23 in. (82 mm) 1.3 in. (33 mm) 32.12 (816 mm) CHM2118N 13.07 in. (332 mm) 10.51 in. (267 mm) 1 7.95 in. (202 mm) 2 3 4.19 in. (106.5 mm) 10 4 9 5 33.19 in.
PAGE 54
Washer-Extractors Mounting Bolt Hole Locations - Model IWF030 (M-speed) 1.1 in. (28 mm) 28.78 in. (731 mm) 26.38 in. (670 mm) 16.14 in. (410 mm) 10.24 in. (260 mm) ø0.87 in. (ø22 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 55
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF030 (M-speed) Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
PAGE 56
Washer-Extractors Installation Anchoring to Metal Base Models IWF014, IWF018, IWF025 and IWF030 (M-speed) The machines must be fixed on a metal base which is securely anchored on a concrete base. Refer to Figure 33. CAUTION 1 Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.
PAGE 57
Washer-Extractors Directly to Concrete Base The machine must be anchored directly to concrete base. Refer to Figure 12. 1 5 2 4 3 CHM2104N 1 2 3 4 5 CHM2104N Nut .5 in. (M12) (Models IWF014, IWF018 and IWF025), and .625 (M16) (Model IWF030) Washer 1.57 in. x 0.60 in. x 0.15 in. (40 mm x 17 mm x 4 mm) Bolt .5 in. (M12) (Models IWF014, IWF018 and IWF025), and .625 (M16) (IWF030) Concrete Base 9.48 in. (250 mm) (Models IWF014, IWF018 and IWF025), and 13.77 in.
PAGE 58
Washer-Extractors Specifications and Dimensions - Models IWF033 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 28.88 lb. (13.1 kg) 1:10 31.96 lb. (14.5 kg) 1:9 35.49 lb. (16.1 kg) Cylinder Cylinder diameter, in. (mm) 26.77 (680) Cylinder depth, in. (mm) 17.74 (400) Cylinder volume, ft.3 (l) 5.12 (145) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 33.14 (842) Front Loading Door opening size, in. (mm) 15.
PAGE 59
Washer-Extractors Machine Dimensions - Model IWF033 (M-speed) 8.66 in. (220 mm) 15.35 in. (390 mm) 47.4 in. (1204 mm) 46.26 in. (1175 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 30.71 in. (780 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) CHM2144N CHM2144N 13.07 in. (332 mm) 16.14 in. (410 mm) 1.3 in. (33 mm) 29.92 in. (760 mm) 3.23 in. (82 mm) 32.12 (816 mm) CHM2145N CHM2145 10.51 in. (267 mm) 1 7.95 in. (202 mm) 2 4.17 in. (106 mm) 3 10 4 9 4.29 in.
PAGE 60
Washer-Extractors Mounting Bolt Hole Locations - Model IWF033 (M-speed) 28.78 in. (731 mm) 16.14 in. (410 mm) ø0.87 in. (ø22 mm) 26.38 in. (670 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 61
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF033 (M-speed) Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
PAGE 62
Washer-Extractors Specifications and Dimensions - Model IWF040 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 36.15 lb. (16.4 kg) 1:10 39.90 lb. (18.1 kg) 1:9 44.31 lb. (20.1 kg) Cylinder Cylinder diameter, in. (mm) 26.77 (680) Cylinder depth, in. (mm) 19.68 (500) Cylinder volume, ft.3 (l) 6.39 (181) Cabinet Overall height, in. (mm) 47.40 (1204) Overall width, in. (mm) 30.70 (780) Overall depth, in. (mm) 37.08 (942) Front Loading Door opening size, in. (mm) 15.
PAGE 63
Washer-Extractors Machine Dimensions - Model IWF040 (M-speed) 8.66 in. (220 mm) 15.35 in. (390 mm) 47.4 in. (1204 mm) 46.26 in. (1175 mm) 3.31 in. (84 mm) 2.76 in. (70 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 30.71 in. (780 mm) 10.24 in. (260 mm) 1.1 in. (28 mm) CHM2144N CHM2144N 13.07 in. (332 mm) 20.08 in. (510 mm) 1.3 in. (33 mm) 33.86 in. (860.1 mm) 3.23 in. (82 mm) 36.07 (916.1 mm) CHM2145N CHM2145 10.51 in. (267 mm) 1 7.95 in. (202 mm) 2 4.17 in. (106 mm) 3 10 4 9 4.29 in.
PAGE 64
Washer-Extractors Mounting Bolt Hole Locations - Model IWF040 (M-speed) 1.1 in. (28 mm) 32.72 in. (831 mm) 20.08 in. (510 mm) 30.31 in. (770 mm) 10.24 in. (260 mm) ø0.87 in. (ø22 mm) 1.3 in. (33 mm) 2.76 in. (70 mm) 25.2 in. (640 mm) 2.76 in. (70 mm) 30.71 in.
PAGE 65
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF040 (M-speed) Boiler Fed/Steam Heat 3 3+PE 4 10 10 14/2.5 P 380-415 50/60 3 3+N+PE 12 15 16 14/2.5 Q 200-240 50/60 3 3+PE 12 15 16 14/2.5 X 200-240 50/60 1/3 2/3+PE 12 15 16 14/2.
PAGE 66
Washer-Extractors Specifications and Dimensions - Model IWF055 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 46.95 lb. (21.3 kg) 1:10 51.58 lb. (23.4 kg) 1:9 57.32 lb. (26 kg) Cylinder Cylinder diameter, in. (mm) 29.52 (750) Cylinder depth, in. (mm) 20.86 (530) Cylinder volume, ft.3 (l) 8.26 (234) Cabinet Overall height, in. (mm) 54.17 (1376) Overall width, in. (mm) 33.85 (860) Overall depth, in. (mm) 41.25 (1048) Front Loading Door opening size, in. (mm) 15.
PAGE 67
Washer-Extractors Machine Dimensions - Model IWF055 (M-speed) 53.19 in. (1351 mm) 1.93 in. (49 mm) 19.69 in. (500 mm) 54.17 in. (1376 mm) 9.49 in. (241 mm) 3.54 in. (90 mm) 20.39 in. (518 mm) 3.54 in. (90 mm) 26.77 in. (680 mm) 33.86 in. (860 mm) 1.97 in. (50 mm) CHM2150N CHM2150N 35.43 in. (900 mm) 36.5 in. (927 mm) 12.64 in. (321 mm) 0.55 in. (14 mm) 38.76 in. (984.5 mm) CHM2151 CHM2151N 9.49 in. (241 mm) 9.29 in. (236 mm) 10 1.97 in. (50 mm) 11.1 in. (282 mm) 1 5.94 in.
PAGE 68
Washer-Extractors Mounting Bolt Hole Locations - Model IWF055 (M-speed) 1.97 in. 50 mm) 35.43 in. (900 mm) 20.39 in. (518 mm) 11.1 in. (282 mm) ø1.06 in. (ø27 mm) 1.97 in. (50 mm) 3.54 in. (90 mm) 26.77 in. (680 mm) 3.54 in. (90 mm) 33.86 in.
PAGE 69
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF055 (M-speed) Boiler Fed/Steam Heat 3 3+PE 6 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 16 20 20 12/4.0 Q 200-240 50/60 3 3+PE 16 20 20 12/4.0 X 200-240 50/60 1/3 2/3+PE 16 20 20 12/4.
PAGE 70
Washer-Extractors Specifications and Dimensions - Model IWF075 (M-speed) Capacity (dry weight) Ratio (kg/l) 1:11 61.72 lb. (28 kg) 1:10 67.02 lb. (30.4 kg) 1:9 73.41 lb. (33.3 kg) Cylinder Cylinder diameter, in. (mm) 33.46 (850) Cylinder depth, in. (mm) 21.14 (537) Cylinder volume, ft.3 (l) 10.73 (304) Cabinet Overall height, in. (mm) 55.55 (1411) Overall width, in. (mm) 38.97 (990) Overall depth, in. (mm) 46.85 (1190) Front Loading Door opening size, in. (mm) 15.
PAGE 71
Washer-Extractors Machine Dimensions - IWF075 (M-speed) 54.59 in. (1387 mm) 2.81 in. (71.5 mm) 19.69 in. (500 mm) 55.57 in. (1412 mm) 9.76 in. (248 mm) 2.76 in. (70 mm) 33.46 in. (850 mm) 2.76 in. (70 mm) 13.66 in. (347 mm) 2.64 in. (67 mm) 38.98 in. (990 mm) CHM2153N 1 9.72 in. (247 mm) 2 7.36 in. (187 mm) 3 43.8 in. (1113 mm) CHM215 CHM2154N 4 10 4.53 in. (115 mm) 6 3.86 in. (98 mm) 40.3 in. (1024 mm) 12.22 in. (311 mm) 49.61 in. (1260 mm) 8 46.02 in. (1169 mm) 5 9 10.
PAGE 72
Washer-Extractors Mounting Bolt Hole Locations - Model IWF075 (M-speed) 2.64 in. (67 mm) 22.44 in. (570 mm) 40.55 in. (1030 mm) 13.66 in. (347 mm) ø1.06 in. (ø27 mm) 1.81 in. (46 mm) 2.76 in. (70 mm) 33.46 in. (850 mm) 2.76 in. (70 mm) 38.98 in.
PAGE 73
Washer-Extractors WARNING Only trained personnel should perform this procedure. Use caution while servicing machines with covers removed and power applied. W700 Electrical Installation Requirements - Model IWF075 (M-speed) Boiler Fed/Steam Heat 3 3+PE 7 15 10 14/2.5 P 380-415 50/60 3 3+N+PE 25 30 30 10/6.0 Q 200-240 50/60 3 3+PE 25 30 30 10/6.0 X 200-240 50/60 1/3 2/3+PE 25 30 30 10/6.
PAGE 74
Washer-Extractors Installation Anchoring to Metal Base Models IWF033, IWF040, IWF055 and IWF075 (M-speed) The machines must be fixed on a metal base which is securely anchored on a concrete base. Refer to Figure 44. CAUTION 1 Ensure that the machine is installed on a level floor of sufficient strength and that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked.
PAGE 75
Washer-Extractors Directly to Concrete Base The machine must be anchored directly to concrete base. Refer to Figure 45. 1 2 5 4 3 CHM2104N 1 2 3 4 5 CHM2104N Nut .625 in. (M16) Washer 1.57 in. x 0.60 in. x 0.15 in. (40 mm x 17 mm x 4 mm) Bolt .625 in. (M16) Concrete Base 15.74 in. (400 mm) (Models IWF033, IWF040), 21.65 in. (550 mm) (Model IWF055), and 27.55 in. (700 mm) (Model IWF075) Machine Base Figure 45 IMPORTANT: Machine bolts should be re-checked on a quarterly basis.