User's Manual

Graphic Display – General Specifications
ITEM
DESCRIPTION
UNIT
LCD type
FSTN Positive Transflective
-
Viewing Angle
6
O’clock
Module size (W×H×T)
136.6 × 176.0 × 5.0
mm
Viewing area (W×H)
120 × 82.65
mm
Viewing angle
6 O’clock
Number of dots
320 × 240
dots
Dot size (W×H)
0.31 × 0.31
mm
Dot pitch (W×H)
0.325 × 0.325
mm
Backlight
LED, White
Operating temperature
-4 to 185
-20 to 70
0
F
0
C
Backlight
ITEM
DESCRIPTION
UNIT
Technology
LED
Colour
White
Power Dissipation (MAX)
0.51
W
Forward Voltage (Typical)
3.1
V
Smart Card Interface
This 16-way proprietary interface connects the IPS Card Reader PCBA to the MSCM. Processed magnetic strip data
as well as direct access to smartcard chip contacts is achieved through this contact.
Coin Validator Interface
This 10-way proprietary interface connects the IPS Coin Validator to the MSCM. This allows for analog and digital
signals relating to the coin characteristics being analysed to be communicated to the MSCM for further processing.
GSM / CDMA
The primary component for this interface is the Telit UE910-NAD installed in U102. The UE910 is an HSPA 7.2 Mbps
technology member of the xE910 family.
For further information visit http://www.telit.com/en/products/umts.php
UE910-NAD
ITEM
DESCRIPTION
All UE910 variants are dual-band GSM/GPRS/EDGE and dual band UMTS/HSPA
Features
 Advanced E-GPRS/WCDMA/HSDPA/HSUPA Software protocol stack (Layer
1 to 3) – Version: 3GPP Release 7
 GSM Quad band (900/1800 MHz for EUx, 850/1900 MHz for NAx)
 WCDMA dual-band: B1&B8 for the EUx models and B2&B5 for the NAx
models
 HSDPA up 7.2Mbps
 HSUPA up to 5.76Mbps
 WCDMA up to 384kbps downlink/uplink
 DTM (Dual Transfer Mode)
 CPC (DRX/DTX) (Continuous Packet Connectivity)
 DARP