User's Manual

IPS GROUP, Inc. – M5 Manual (Ver. 1.0)
All information contained herein is considered confidential
17
Coin Test
The coin test menu allows maintenance staff to verify that coins are validated correctly.
The two key components in coin testing are the Coins, which shows the total coin count
and Value, which is the value of the last coin inserted. When a coin is inserted, the
Coins number will increase by 1 and the value will reflect the new coin. A number with a
negative value will appear if that coin is not accepted (such as a penny). If a coin is
inserted but the Coins count does not change, this may indicate a fault with the meter or
the coin validator. Also if the value given for a particular coin is incorrect, the meter may
not be programmed correctly.
Card Test
In order to verify that a card is being read properly, it can be tested in the Card Test
menu. Once in this menu, insert and remove a card. The credit card type, number, and
expiration date should appear on the screen. This information will not be seen if the
card reader is malfunctioning or if the card is damaged.