User's Manual

IPS GROUP, Inc. – M5 Manual (Ver. 1.0)

All information contained herein is considered confidential

Main Screen

Once diagnostic mode is entered, the first screen displayed (above) will show the

firmware version (top), the name of the meter’s current configuration will be below,

terminal serial number (which should match the number on the sticker on the top of the

meter), and the pole’s RFID tag number.

Faults

This menu will display any errors reported by the meter. When an error occurs, a

message is sent from the Management System to maintenance staff via SMS or e-mail.

The message indicates the type of error that occurred, the time, and the location.

Here is a sample message generated

when the meter detects a coin blockage:

“Coin Blockage at Pole Serial Number X-

YYY (Terminal Serial Number 0012345)”

(Refer to the index for a complete list of

codes).