ROOFING PRODUCTS PRO D UCT CATA L O G
RELIABILITY SERVICE INNOVATION IPS Roofing Products is an industry leader in residential and commercial roofing products. Beginning with vent pipe flashings, IPS Roofing Products has sustained a superior reputation among roofing distributors and contractors for high quality product, committed service and industry expertise. All products are tested to exceed strict code requirements and to assure quality, durability and safety.
M U LT I - S I Z E ROOFING PRODUCTS MULTI-SIZE ALUMINUM BASE ROOF FLASHINGS • 25 mil aluminum base with elastomer collar • Fits any roof pitch to 45° (1 ½” and 2” vent pipe allow for a pitch range beyond 45°) • Tested for ultraviolet, ozone and weather resistance • Multi-size flashings fits 1 ¼” – 3” and 3” – 4” vent pipe • Limited Lifetime Warranty for the life of the current roof system • Approved for type “B” installations • Elastomer collar heat tested to 180°F PRODUCT DESCRIPTION MODEL UPC CUBIC
MULTI-SIZE ALL FLEXIBLE ROOF FLASHINGS • All flexible, one-piece base and collar • Fits any roof pitch to 45° (1 ½” and 2” vent pipe allow for a pitch range beyond 45°) • Tested for ultraviolet, ozone and weather resistance • Multi-size flashing fits 1 ¼” – 3” and 3” – 4” vent pipe • Limited Lifetime Warranty for the life of the current roof system • Approved for type “B” installations • Elastomer collar heat tested to 180°F PRODUCT DESCRIPTION MODEL UPC CUBIC FT.
C U S T O M ROOFING PRODUCTS CUSTOM MULTI-SIZE COPPER BASE ROOF FLASHINGS • 16 ounce copper base with elastomer collar • Fits any roof pitch to 45° (1 ½” and 2” vent pipe allow for a pitch range beyond 45°) • Tested for ultraviolet, ozone and weather resistance • Multi-size flashings fit 1 ¼” – 3” and 3” – 4” vent pipe • Limited Lifetime Warranty for the life of the current roof system • Approved for type “B” installations • Elastomer collar heat tested to 180°F 06 PRODUCT DESCRIPTION MODEL UPC CUBI
CUSTOM FINISH MULTI-SIZE GALVANIZED BASE ROOF FLASHINGS • 24 guage galvanized steel base with elastomer collar AVAILABLE FINISHES • Fits any roof pitch to 45° (1 ½” and 2” vent pipe allow for a pitch range beyond 45°) Brown • Tested for ultraviolet, ozone and weather resistance Weathered Gray Black • Approved for type “B” installations • Elastomer collar heat tested to 180°F • Multi-size flashings fit 1 ¼” – 3” and 3” – 4” vent pipe • Limited Lifetime Warranty for the life of the current roof system
S TA N D A R D ROOFING PRODUCTS STANDARD ALUMINUM BASE ROOF FLASHINGS • 25 mil. aluminum base with elastomer collar • Fits any roof pitch to 45° • Tested for ultraviolet, ozone and weather resistance • Approved for type “B” installations • Elastomer collar heat tested to 180°F • Limited Lifetime Warranty for the life of the current roof system PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 81900 8 ¾" x 12 ½" Base for 1 ¼" or 1 ½" Vent Pipe AB1 012181-819005 1.
STANDARD HARD PLASTIC BASE ROOF FLASHINGS • Thermoplastic hard base with elastomer collar • Fits any roof pitch to 45° • Tested for ultraviolet, ozone and weather resistance • Approved for type “B” installations • Elastomer collar heat tested to 180°F • Limited Lifetime Warranty for the life of the current roof system PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 81750 9 ¼" x 13" Base for 1 ¼" or 1 ½" Vent Pipe HB1 012181-817506 1.
S P E C I A LT Y ROOFING PRODUCTS MULTI-SIZE METAL ROOF PIPE FLASHINGS • Each flashing is adjustable to fit several pipe diameters – eight models to fit ¼” through 13” pipe sizes • Clearly marked pipe diameters ensure a tight accurate fit • Made of long life, flexible, weatherproof EPDM rubber • Pleated cone adjusts to any roof pitch • Flexible, corrosion-resistant aluminum base ring conforms to any roof panel configuration • Continuous service temperature range of -65°F to 250°F • One-piece construct
STANDARD SIZE RAIN COLLARS • Use on new installations to prevent leaks from vent pipe movement • Slides over any brand of flashing for instant repair • Eliminates the need for mastic or caulk • Fully tested for ultraviolet, ozone and weather resistance • Individual size and multi-size models available • Limited Lifetime Warranty for the life of the current roof system PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 81725 Collar for 1 ¼" or 1 ½" Vent Pipe RC1 012181-817254 1.
S P E C I A LT Y ROOFING PRODUCTS SOLAR ROOFING PRODUCTS • Commercial & residential: water-tight seal for solar mounting system • RCS1 Solar Collar is new and improved with a tapered neck and internal ribs for a water-tight seal • Requires no mastic, caulking or taping – mess free • Limited Lifetime Warranty for the life of the current roof system PRODUCT DESCRIPTION MODEL UPC CUBIC FT.
C O M M E R C I A L ROOFING PRODUCTS APE-2000 ONE-WAY AIR PRESSURE EQUALIZER Recommended for all types of roofing systems. NOTE: Available with or without one-way insert. Also available with removable caps (please specify). • .063 gauge aluminum DIMENSIONS: Height: 11.25" Base Diameter: 11.00" Stack Diameter: 6.00" Cap Height: 4.
C O M M E R C I A L ROOFING PRODUCTS JIMCO SJL-3 ECONOMY VENT Recommended for all types of roofing systems. Install one vent per 900 sq. ft. of roof area. NOTE: Available with or without one-way EPS insert (please specify) • .063 gauge aluminum DIMENSIONS: Height: 8.50" Base Diameter: 8.00" Stack Diameter: 3.00" Cap Height: 2.
JIMCO BREATHER VENT Recommended for all types of roofing systems. Install one vent per 1000 sq. ft. of roof area • .063 gauge aluminum DIMENSIONS: Height: 9.50" Base Diameter: 11.00" Stack Diameter: 4.25" Cap Height: 2.
C O M M E R C I A L ROOFING PRODUCTS JIMCO CJ-30 VENT Recommended for all types of roofing systems. Install one vent per 600 sq. ft. of roof area. NOTE: Also available with removable cap (please specify). • .063 gauge aluminum DIMENSIONS: Height: 5.50" Base Diameter: 10.25" Stack Diameter: 6.00" Cap Height: 1.
RETROFIT INSERT ROOF DRAINS DIMENSIONS: Flange: 16 ½" Strainer Diameter: 7 ½" Overall Length of Drain Outlet: 12" • RetroFit drains with expandable anti-back-up seal(s) • Constructed of a heavy gauge (.081) Spun Aluminum • Bolt-in-place strainer dome PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 86111 Drain Pipe Size: 3" Outlet Outside Diameter: 2.75" Outlet Length: .727" 86111 012181-861110 3.091 6 30 86112 Drain Pipe Size: 4" Outlet Outside Diameter: 3.
C O M M E R C I A L ROOFING PRODUCTS COMMERCIAL ROOF DRAINS & ACCESSORIES PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 86115 3" PVC Roof Drain W/Plastic Dome 4865 012181-861158 0.727 1 4 86120 3" ABS Roof Drain W/Plastic Dome 5865 012181-861202 0.727 1 3 86095 3" PVC Roof Drain W/Cast Iron Dome 4863 012181-860953 0.727 1 8 86100 3" ABS Plastic Roof Drain W/Cast Iron Dome 5863 012181-861004 0.
CAST IRON ROOF DRAIN • Overflow combo • 8 ¾" CD • 6 ½" dome PRODUCT DESCRIPTION MODEL UPC CUBIC FT./CASE UNITS/CASE LBS/CASE 60219 2" No-hub Outlet ABA602 767580-020858 0.912 1 31 60220 3" No-hub Outlet ABA603 767580-020865 0.912 1 31 60222 4" No-hub Side Outlet ABA604 767580-020872 0.912 1 31 767580-020810 0.
L I M I T E D L I F E T I M E WA R R A N T Y Roof Flashings & Rain Collars IPS Corporation (“IPS Corp.”) warrants to all original purchasers that IPS Corp. products shall be of good quality and free from defects in material and workmanship. Roof Flashings and Rain Collars are covered under this warranty for the life of the current roof system on which they are installed. If any IPS Corp.
