Data Sheet

ManualsBrandsipc-computer ManualsComputer & OfficeSamsung Laptop battery replaces original battery AA-PB9NC6B, AA-PB4NC6W, AA-PB9NC5B, AA-PB9NC6W, AA-PB9NS6B, AA-PB9NS6W,

Standard 标准版

Document

SAMSUNG R470

1/10

Revision Date

04/03/19

SAMSUNG R470 Battery Specification

SAMSUNG R470 电池规格书

Registered

编制

Checked

审核

Approved

批准

Customer（客户）：

Dept .

部门

Signature

签名

Date

日期

QA Dept

品质

R&D Dept

研发

Approved

批准

Summary of content (10 pages)

PAGE 1
Standard 标准版 SAMSUNG R470 Battery Specification SAMSUNG R470 电池规格书 Registered 编制 Checked 审核 Approved 批准 Customer（客户）： Dept .
PAGE 2
Standard 标准版 TABLE OF CONTENTS 目录 TABLE OF CONTENTS 目录 .................................................................................................................... 2 1. MODIFIED LIST 修订履历 ............................................................................................................... 3 2. SCOPE 使用范围 .................................................................................................................................. 4 3. APPLICATION OF PRODUCT 产品的应用 .................
PAGE 3
Standard 标准版 1. MODIFIED LIST 修订履历 Product Modified Record List 产品修订履历表 Version 版本 Date 日期 Mark 标记 Modification description 修订说明 1.
PAGE 4
Standard 标准版 2. SCOPE 使用范围 This specification is applied to Li-ion rechargeable batter pack (3 series 2 parallel) with “SMBUS interface & SBS 1.0 standard” delivered to SAMSUNG R470 as power supply for notebook PC. 这份规格是使用在：可充电锂电池包(3 串 2 并的结构)，包含 SMBUS 通讯接口并支持 SBS 1.0 的标准；本产品将使用在 SAMSUNG R470 系列笔记型计算机。 3. APPLICATION OF PRODUCT 产品的应用 Battery Pack Manufacture has a responsibility to guarantee the Quality of Battery Pack, And Guarantee the Protection of Cell and Pack at abnormal usage of latest Customer.
PAGE 5
Standard 标准版 * Note 1 Rate discharge: Constant current discharge (0.5C) till end discharge voltage at 25±2℃. Rate charge: Constant current charge (0.2C5A) till end voltage 12.6Vdc, 12.6V constant voltage and 0.2C5A current limited charge to current reach 200mA at 25±2℃. * 附注 1 标准放电：定电流放电(0.5C5A)放电至放电终止电压，在 25±2℃的操作环境下。标准充电：先额定电流充电至 12.6Vdc，然后 12.6Vdc 定电压充电在 0.5C5A 的最大充电电流条件下，充电到充电电流小于 200mA，在 25±2℃的操作环境下。 ELECTRICAL PERFORMANCE 电气性能 6. 6.1 ELECTRONIC CONTROL CIRCUIT CONSUMPTION 电子控制电路功耗 No 1 2 3 6.
PAGE 6
PAGE 7
Standard 标准版 7. 8. MECHANICAL 机构项目 No Item 项目 1 Outside appearance 外观要求 2 Outside dimension and weight 外观尺寸与重量 Remark 备注 No prominent stain, deformation nor damage 没有明显的污点、变形、损坏 According to the attached drawings. Approx 320g 大约 320g Black 黑色 Shell Material: ABS 胶壳材料：ABS L.W.H Approx 204.1*47.9*20.8mm 长宽高约为 204.1*47.9*20.
PAGE 8
Standard 标准版 Leakage performance 渗漏测试 6 9 Leave rated charge test sample at 60±2℃ and 85% RH for 20 days, then leave for 1 week at 25±2℃. 测试样品于标准充电后，在 60±2℃ 、 85% RH 环境中存放 20 天，然后在 25±2℃环境中存放一周。 No rupture, fire, smoke nor Leave 8 hours connecting: 0.5C /13.5V, power supply at 25±2℃ Over charge (Safety leakage after rated charge. test) 没有破裂、着火、冒烟、漏于标准充电后，以 0.5C / 13.5V 充电 8 小时。在 25±2℃的操过充电(安全测试) 液作环境下。 7 8 No leakage 没有渗漏 Short between terminal No rupture, fire nor leakage.
PAGE 9
Standard 标准版 Figure 2 10. IDENTIFICATION LABEL 鉴定标签 To attached label printed with mode No. and lot No.. 标签贴纸内容包括型号 & 批号 Customer specified 由客户指定 11. SHIPMENT 装运 The battery shall be shipped in 40-90 % charged state.
PAGE 10
Standard 标准版 12.