Product Manual

22
8.2 SETTING DESIRED WORKING PRESSURE
1. Turn the MUTT
®
on, by selecting Battery or External power with the Power Source
Switch.
2. Set Emergency Side Air Ball Valve to the OPEN position.
3. Turn Air Regulator Knob clockwise or counterclockwise until needle on the
Emergency Side Air Gauge points to the desired operating pressure (Most shops
prefer 80-100 PSI during testing).
Set Emergency Side Air Ball Valve to OPEN, Turn Regulator to Desired PSI
19
7.4 ACTIVATING HAZARD LIGHTS:
The four-way fl ashers on the vehicle can be activated manually or with the remote
control.
Manually
1. To activate, set the Hazard Switch to the ON position.
2. To deactivate, set the Hazard Switch to the OFF position.
Remote Control
1. To activate, press and hold the DOWN ARROW button for 5 seconds.
Set the Hazard Switch to the ON Position
Set the Hazard Switch to the OFF Position
Press and Hold DOWN ARROW to Activate