Product Manual
26
8.5 EMERGENCY AIR EXHAUST
To apply the parking brake at any time during testing, simply turn the Emergency
Side Air Ball Valve to the EXHAUST position.
1. Make sure the Power Source Switch on the Control Panel is on.
2. Set the Emergency Side Air Ball Valve to the EXHAUST position to exhaust air.
Set Emergency Side Air Ball Valve to EXHAUST
15
6.4 USING THE 12-BUTTON REMOTE CONTROL
The included remote control(s) is preprogrammed to your MUTT
®
and should never
lose its programming. In the event that you suspect your remote has lost its program-
ming, contact technical support at 888-786-7899 or email tech247@ipatools.com.
HOW TO PROGRAM THE 12-BUTTON REMOTE
1. Press and hold the Clearance Button while turning the Trailer Tester’s main power ON.
2. Continue to hold the button for 2 seconds and then release.
3. Your Remote Control is now programmed.
HOW TO USE THE 12-BUTTON REMOTE
1. CIRCUIT SELECTION
Pressing these buttons will select the
corresponding circuit on the MUTT
®
(Pressing
and holding the ABS/AUX or Brake Light Buttons
will latch both circuits on.)
PR
E
V.
CIR
C
.
NEXT
CIR
C
.
A
IR B
R
AKE
S
ALL CIRC
.
ON
HAZARDS
AUTOCYLE
A
B
S/AU
X
LEFT
TURN
CLE
A
RAN
C
E
TAIL
/TAG
R
I
G
H
T
TUR
N
B
R
AKE LIGHT
12-Button Remote Control