Product Manual

4
5
6
6
SAL Sensor conguration error
SAR Sensor conguration error
Verify correct ABS conguration
using blink codes or other diagnostic
tools.
If needed, reset to the default ABS
conguration and power-up to initiate
auto-conguration.
3
4
13
13
6 1 Over-voltage Power supply diagnostic trouble
code.
251 3
6 2 Low-voltage Power supply diagnostic trouble
code.
251 4
6 3 Excessive power line resistance Power supply diagnostic trouble code. 251 13
7
7
1
2
MOD1 Hold solenoid shorted or open
MOD1 Release solenoid shorted or
open
Clear faults.
If faults return, replace the TABS-6
Module.
42
48
3, 4, 5
6 or 12
3, 4, 5
6 or 12
8
9
8
9
1
1
2
2
MOD2 Hold solenoid shorted or open
MOD3 Hold solenoid shorted or open
MOD2 Release solenoid shorted or
open
MOD3 Release solenoid shorted or
open
Static ABS Modulator Fault.
43
44
49
50
3, 4, 5
6 or 12
3, 4, 5
6 or 12
3, 4, 5
6 or 12
3, 4, 5
6 or 12
7
8
9
3
3
3
MOD1 ABS modulator dynamic error
MOD2 ABS modulator dynamic error
MOD3 ABS modulator dynamic error
Dynamic ABS Modulator Fault. 7
8
9
7
7
7
8
9
4
4
MOD2 Valve conguration error
MOD3 Valve conguration error
Verify correct ABS conguration using
blink codes or other diagnostic tools.
If needed, reset to the default ABS
conguration and power-up to initiate
auto-conguration.
8
9
13
13
10
10
1
2
Valve MOD1/2 low-side switch
shorted to ground
Valve MOD3 low-side switch shorted
to ground
Check for corroded/damaged wiring or
connectors between the ECU and MOD.
At the MOD harness connector, verify:
No continuity from modulator/AUX
leads to ground.
After repairs or if no issues found,
then clear faults.
If faults return, replace the TABS-6
Module.
7
9
4
4
10 3 ABS modulator dynamic error - all
valves
Dynamic ABS Modulator Fault. 7 7
10 4 Excessive ABS activity Dynamic Wheel Speed Sensor Fault. 1 7
POWER
MODULATOR (MOD)
COMMON
31