Product Manual

8.4 ACTUATING AIR BRAKES

This feature allows you to see the slacker adjustments and the pushrod travel in real

time. Brakes can be activated manually or with the remote control.

ACTUATE BRAKES MANUALLY

1. Charge the Emergency Side to the desired working pressure and leave both the

Emergency and Service Side Air Ball Valves in the OPEN position.

2. To engage the brakes, push the Service Side Brake Control Switch to

PRESSURIZE.

3. To disengage brakes, push Service Side Brake Control Switch to EXHAUST.

4. Repeat as necessary.

ACTUATE BRAKES WITH REMOTE CONTROL

1. Charge the Emergency Side to the desired working pressure.

2. With both Air Ball Valves in OPEN position, set the Service Side Brake Control

Switch to REMOTE.

3. Point the remote in the general direction of the MUTT

4. Press the Air Brakes button once to engage the service air brakes.

5. Press the Air Brakes button again to disengage the brakes.

6. Repeat as necessary.

Engage Brakes Disengage Brakes

Press AIR BRAKES Button

Set Service Side and Emergency Air Ball Valves to Open