Product Manual

11
6.2 AUTO SHUTDOWN FEATURE
If left inactive for a period of 20 minutes, the MUTT® enters a Sleep Mode and
powers down.
• A sound is emitted every 20 seconds during Sleep Mode.
• Activation of the control knob will cancel Sleep Mode.
6.3 USING THE 12-BUTTON REMOTE CONTROL
The included remote control(s) is preprogrammed to your MUTT
®
and should never
lose its programming. In the event that you suspect your remote has lost its program-
ming, contact technical support at 888-786-7899 or email [e-mail].
HOW TO PROGRAM THE 12-BUTTON REMOTE
1. Press and hold the Clearance Button while turning the Trailer Tester’s main power
ON.
2. Continue to hold the button for 2 seconds and then release.
3. Your Remote Control is now programmed.
HOW TO USE THE 12-BUTTON REMOTE
1. CIRCUIT SELECTION
Pressing these buttons will select the
corresponding circuit on the MUTT
®
(Pressing
and holding the ABS/AUX or Brake Light Buttons
will latch both circuits on.)
12-Button Remote Control