Product Manual

WARNING INDICATORS
Explanation of the diagnostic functions of the warning indicators.
GREEN: GOOD RED: LOW
Fig. 6 – Warning Indicators
POWER TO TESTER WARNING INDICATORS:
VOLTAGE INDICATOR (Fig. 6)
• When the battery supply voltage drops to 9V or less, the MUTT® shuts down
power to all circuits and the Voltage Indicator ashes red.
• Charging and switching to an external power source is required to continue
testing.
REVERSED POLARITY INDICATOR (Fig. 6)
• Flashes when battery clamps have been reversed at the battery posts.
• Correcting polarity of the battery terminal clamps deactivates the warning.
• The MUTT® is internally protected from polarity reversal.
RED TRAILER WARNING INDICATORS
These signals indicate a fault.
OVERLOAD WARNING INDICATOR (PULSAR MODE) (Fig. 6)
• When the MUTT® confronts a constant amperage draw above 18 AMPs or
a direct short, the warning sounds and flashes.
• Voltage is cycled to the shorted or overloaded circuit in 3 second o in-
tervals to aid in diagnosing the extreme amperage draw. (This function is
comparable to an auto reset circuit breaker).
12
OVERLOAD
WARNING
INDICATOR
OPEN
CIRCUIT
INDICATOR
REVERSE
POLARITY
INDICATOR
VOLTAGE
INDICATOR
GROUND
INDICATOR