Product Manual

13
6.3 USING THE 3-BUTTON REMOTE CONTROL
The included remote control(s) is preprogrammed to your MUTT® and should never
lose its programming. In the event that you suspect your remote has lost its program-
ming, contact technical support at 888-786-7899, or email [e-mail].
HOW TO PROGRAM THE 3-BUTTON REMOTE
1. Press and hold the On/Off Button while turing on the MUTT®.
2. Continue to hold for 2 seconds.
3. Your Remote Control is now programmed.
HOW TO USE THE WIRELESS REMOTE
1. UP ARROW
Press and release to select the next circuit
in clockwise rotation. Press and hold for
5 seconds to activate All Circuits On Mode.
2. DOWN ARROW
Press and release to select the next circuit in
a counterclockwise rotation. Press and hold
for 5 seconds to turn on hazard lights.
3. ON/OFF
Press and release to engage/disengage
Auto Cycle.
4. REMOTE CONFIRMATION INDICATOR
Press any of the buttons (1, 2, 3) and the blue
light (4) will illuminate to conrm the battery
power of the remote.
NOTE: Inclement weather, nearby power transformers and closely parked trailers
may reduce the remote signal.
The supplied, key fob battery for the remote control is 12V, Alkaline Energizer type
A23. A Gold Peak type 23A or Duracell MN21 battery can also be used.
1
4
2
3
3-Button Remote Control
6.4 USING THE 12-BUTTON REMOTE CONTROL
The 12-button remote control is optional.
HOW TO PROGRAM THE WIRELESS REMOTE
1. Press and hold the Clearance Button while
turning the Trailer Tester’s main power ON.
2. Continue to hold the button for 2 seconds,
and then release.
3. Your Remote Control is now programmed.
12-Button Remote Control