mac

Commands for PPPoE Intermediate Agent
499
“#”between Slot ID and Port ID, delimiter with “/”between Port ID and Vlan ID.
Switch(config)#pppoe intermediate-agent identifier-string xyz option spv delimiter #
delimiter /
Switch# show pppoe intermediate-agent identifier-string option delimiter
config identifier string is : xyz
config option is : slot , port and vlan
the first delimiter is : "# "
the second delimiter is : "/ "
After port ethernet1/3 of vlan3 receives PPPoE packets, circuit-id value of the added
vendor tag is ”xyz eth 01#003/0003”.
47.13 pppoe intermediate-agent vendor-tag strip
Command: pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Function: Enable vendor-tag strip function of the port, the no command cancels this
function.
Parameter: None.
Command Mode: Port mode
Default: Disable vendor-tag strip function of the port.
Usage Guide: If the received packet includes vendor tag from server to client, strip this
vendor tag.
Note: 1. Must enable global pppoe intermediate-agent function.
2. It must be configured on trust port.
Example: Trust port ethernet1/1 enables vendor tag strip function.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
Switch(config-if-ethernet1/1)#pppoe intermediate-agent vendor-tag strip
47.14 show pppoe intermediate-agent access-node-id
Command: show pppoe intermediate-agent access-node-id
Function: Show the configured access node ID.
Parameter: None.
Command Mode: Admin mode
Default: The configuration information is null.
Usage Guide: This command is used to show access-node-id configured by user.
Example: Show access-node-id configuration information.