User's Manual

SECTION 2: SETUP AND CONFIGURATION METHODS
M64700G25-FCCRpt.doc Page 6
Mobile Radio-to-VIU-to-Mobile Computer Setup
Figure 4: High Speed Mobile Radio-to-VIU-to-Mobile Computer Setup
Additional components are required to setup a high speed mobile radio-to-VIU-to-mobile computer
configuration and they are listed below in Table 3:
TABLE 3: HIGH SPEED MOBILE RADIO-TO-VIU-TO-MOBLE COMPUTER
COMPONENTS REQUIRED FOR INSTALLATION
QTY DESCRIPTION
1 IPSeries High Speed Mobile Radio
1 Mobile Computer
1 Voice Interface Unit (VIU)
1 20-foot serial cable (DB9F – DB9M)
1 10-foot serial cable (DB9F – DB9M)
1 IPMobileNet SLIP Port Driver Installation Diskette (SLIP2IPMN.exe)

To configure the high speed mobile radio, the voice interface unit, and the mobile computer for this
type of setup, follow the instructions on pages 18 and 19 in the Mobile Computer Setup for
Communication with the Mobile Radio Installation Guide (IPMN p/n: 516.80310.IG) available on
the Product Documentation CD.
Within this configuration, the high speed mobile radio is unable to fully list its parameters due to the
limited buffers in the VIU. The high speed mobile radio will not be able to receive DHCP offers
within this configuration.