User's Manual

SECTION 4: FACTORY TEST PROCEDURE

516.80548.POM_REVA_Product_Owner's_Manual_M64780D25_FCCRpt.doc Page 30 of 44

ECN-5277

Programming and Configuring Mobile Radio

Once the appropriate equipment for performing the factory test are gathered, perform the following steps

to program and configure an M64780D25 Mobile Radio:

Step 1 Enter the mobile radio serial number, date test being performed, and tester’s name on the

Test Data Sheet (see Appendix B).

Step 2 Program the radio to the current Firmware revision using the AVR programming utility.

Step 3 Connect a PC to the radio and launch the IPMessage program. In the IPMessage window,

type factory default, press [ENTER], and the radio displays the radio’s default values.

Step 4 Enter the appropriate values for the radio's frequency band. The following values were used

for an 806 to 824 MHz mobile radio: